5. vydání Průvodce — Základní pravidla, sestavy a tipy

Concrete outcome: a character with Constitution 16 and Fighter 1 gains roughly +1 HP per level versus Con 14 and secures heavy armor and a once-per-short-rest Action Surge – a significantly better survivability rating in early tiers. This setup is really effective against common ambushes and slightly improves initiative consistency when paired with a Dexterity 14 secondary. You cannot rely on high DPR alone; add survivability mods to avoid quick wipeouts.

For allocation, limit ability point spread to two primary stats (example: Str 16 / Con 16 or Dex 16 / Con 16). The amount of hit points saved over five levels is concrete: approximately +5 HP for the extra Con mod compared with a +2 mod, which translates to 10–15% higher frontliner longevity in standard encounters. Community group jsoc ran 2,000 simulated combats and reported that the Fighter dip produced a 7% higher party success rating in single-target skirmishes. Thanks to those logs, testers told others to treat the dip as an easy efficiency upgrade; some long sessions even had players changing to a fresh shirt between runs.

Race and subclass notes: choose races that complement your role – Half-Orc or Dwarf for frontline grit, High Elf or Tiefling for spell options. Races with bonus Constitution or free proficiencies create a major benefit for tank roles. Alternatively, a Half-Elf with a 14 in both primary stats trades raw HP for skill breadth and social utility. Expect poor results if you stack too many off-role proficiencies: common traps include low Wisdom saves and fragile AC from light-armored dex builds without backup defensive options.

Consult the quick reference table in the next section for damage-per-round tiers, expected healing amount per short rest, and effective save thresholds by level. The table makes it easy to compare archetypes: melee setups that lean into reach or lightning mobility (mobile feat or Dash options) perform better against swarms, while ranged setups probably excel at controlled single-target damage. When exploring multiclass choices, watch the minimum ability thresholds for multiclass entry and avoid traps like losing class features for only a marginal benefit.

DD (D&D) 5th Edition Guide – Rules, Builds & Tips; 12 Elven Armor

Prefer elven studded leather for scouts: it grants stealth bonuses while leaving knees and other limbs free, lets you doff quickly, and keeps your primary stat focused on DEX for reach and mobility.

1. Elven Studded Leather – Light, minimal padding, conforms to form; insanely good for melee rogues and rangers who need to move through forest cover and avoid disadvantage on Stealth checks.
2. Elven Leather – Cheaper variant with leather focus; fans of survivability will show preference when reduction of noise is a priority.
3. Elven Chain – Hybridizing chain links into light mail; grants moderate AC with no heavy-armor drawbacks for elves that want protection without losing DEX bonuses.
4. Ebony Scale – Dark, black plates over leather; good for sentries and nightwatch. Takes weight but distributes protection across torso and knees to reduce critical hits to limbs.
5. Frostcloak Lamellar – Integrated frost runes that grant cold resistance; helpful against elemental threats and for builds that hybridize damage types.
6. Shadowskin Vest – Minimal padding, designed to conform to movements and reduce sound; a choice for ranged-only archers who prize concealment.
7. Moonweave Mail – Lightweight mail with faint luminescence; grants small bonuses to Perception checks when under moonlight, useful for patrols and sentries.
8. Windrunner Hauberk – Reinforced at shoulders and knees to allow broad reach with polearms; distribute encumbrance so AC remains high without sacrificing DEX-based attack rolls.
9. Ranger’s Laminar – Combines leather and small shields integrated into the arms; likewise ideal for hybridizing defensive and offensive actions.
10. Sentinel’s Mail – Heavy-curved plates for guarding posts; chosen when damage taken must be reduced and everything else is secondary to holding position.
11. Moonshadow Cloak – Free-moving fabric layered over leather, grants concealment options and lets you doff silently; fans who value infiltration will pick this.
12. Hybrid Elven Plate – Rare, hybrid armor that tries to conform plate to elven frames; insanely rare, heavy on padding around joints but grants the best raw protection for tank-oriented elves.

• Stat priorities: distribute points to DEX primary, CON secondary, WIS tertiary for scouting; reduce STR to the minimum needed for carrying and climbing – stat choice affects how armor penalties are taken.
• AC vs stealth tradeoff: leather and studded leather preserve stealth; heavier ebony or plate options grant raw reduction of incoming damage but hurt stealth and movement.
• Shields: use small elven shields to keep reach on polearms; integrated shields in ranger models help distribute impact across armor rather than concentrating on knees or limbs.
• Magic bonuses: seek gear that grants skill bonuses rather than flat AC when possible – bonuses to Stealth, Perception, or Athletics often outperform raw AC for skirmish play.
• Maintenance: doff and don times matter in timed encounters – lighter armors are free to remove quickly, heavy sets require help and can be taken off only with assistance.
• Customization: hybridizing layers (leather underplate with small scale inserts) is a smart choice for parties that need both mobility and protection.
• Role calls: sentries should prioritize Moonweave or Moonshadow for detection; frontline defenders prefer Sentinel’s or Hybrid Plate; scouts pick Elven Studded Leather.
• Elemental threats: frost armor variants reduce cold damage and grant advantage in icy terrain; everything else remains vulnerable unless magical resistance is present.
• Armor padding: thin padding protects joints while keeping weight down; avoid excessive padding around knees if climbing and stealth are frequent tasks.
• Tactical tips: show targets how your armor moves – use concealment and reach to control chokepoints; likewise, distribute party roles so one member takes hits and others exploit mobility.

If told to pick one set for a multi-role elf, choose Elven Chain or Hybrid Elven Plate when your campaign expects prolonged fights; pick Elven Studded Leather or Moonshadow Cloak when infiltration, range, and speed are the priority.

Core rules to apply at the table

Assign a visible initiative tracker and enforce a 30-second decision timer per turn; allow 2 minutes for complex tactical planning, and rotate responsibility for tracking order so every player can keep pace.

• Action economy: Explicitly list actions, bonus actions, reactions and free interactions on the board. If a reaction is unused after its trigger window, mark it as spent for that round to prevent disputes.
• Initiative and order: Use a numbered strip or digital counter; ties go to the player with the highest relevant modifier. Failures to act within the timer move the token to the end of that round.
• Movement and height: Vertikální pohyb stojí navíc 1 stopu za každých 5 stop výstupu; vyšší pozice poskytuje +2 k hodům na útok nebo +1 k obraně v závislosti na situaci – rozhodněte se před hody.
• Krytí a aury: Aury a perzistentní oblasti na mapách označujte s jasnými poloměry. Uvádějte konkrétní modifikátory: poloviční kryt = +2 k OZ, tříčtvrteční = +5 k OZ, efekty aur uvádějí rozsah ve stopách a pravidla pro kumulaci.
• Melee versus ranged: Definujte jasně dosahované čtverce: standardní boj zblízka = sousední čtverec, zbraně s dosahem zasahují o jeden další čtverec dál. Pokud se hráč chce pohybovat skrz nepřítele, vyžadujte sporný hod namísto nejednoznačného posouzení.
• Granáty a plošné efekty: Použití neměnných šablon: malý granát = poloměr 1,5 m (přilehlý), výbuch = 3 m. Základní záchrana: DC 12 Obratnost pro poloviční poškození; sekundární účinky (oheň, omráčení) uvedeny na zařízení.
• Drony a nasazení: Omezte počet aktivních dronů na 1–2 na hráče, pokud pravidla mise nepovolují více. Nasazení spotřebuje deklarovaný typ akce (akce/bonusová akce) a jeho ovládání spotřebuje následující tah operátora, pokud není autonomní.
• Příklady brnění a oděvů: S drátěnou košilí (kroužkovou zbrojí) se zacházejte jako s těžkou zbrojí, která způsobuje postihy kradmosti; lehká košile poskytuje minimální ochranu, ale žádný postih kradmosti. Uveďte zátěž a modifikátory kradmosti na kartách postavy.
• Redukce poškození a obrana: Zapisujte si odolnosti a snížení jako číselné hodnoty na žetony. Pokud se obrana nebo snížení nepoužije ve třech po sobě jdoucích střetnutích, považujte to za zbytečné a buď ji posilte, nebo nahraďte.
• Požární a environmentální rizika: Oheň v prostředí způsobuje pevně stanovené přírůstky poškození za kolo (např. 1k6 za kolo); specifikujte, kolik kol uplyne, než dojde ke změně nebo rozšíření ohně, a zda jsou vyžadovány akce k uhašení.
• Levelování a vyvážení: Před zahájením se rozhodněte mezi postupy pomocí milníků nebo zkušeností. Pokud postup na vyšší úroveň způsobí, že jsou střetnutí triviální, upravte počet nepřátel nebo taktiku, spíše než navyšovat statistiky, aby boje zůstaly zajímavé.
• Flexibilní rozhodování: Umožněte flexibilní rozhodování v nejednoznačných situacích, ale vyžadujte následné upřesnění pravidel v poznámkách po hře. Sledujte dočasná domluvená pravidla, aby se stala konzistentními.
• Taktické pokyny: Podporujte poziční hru: ovládání klíčových bodů, využívání aur k zónování nepřátel a využívání výhod vyššího terénu. Naučte hráče vytvářet si pohotovostní plány pro boj zblízka i na dálku ještě před zapojením do boje.
• Vybavení a spotřební materiál: Zaznamenávejte granáty, lékárničky a opravy poštou na inventurní lístky s uvedením zbývajících počtů. Volně dostupné předměty (drobné léčebné sady, levné granáty) by měly být viditelně označeny, aby každý věděl, co je k dispozici.
• Upřesnění významu mechaniky: Definujte nejednoznačné termíny u stolu (kryt, oslepení, vleže) s přesnými účinky a trváním. Pokud je použita zkratka (tričko = lehký pancíř), uveďte ji na referenční kartě.

Po sezení si dělejte poznámky o všech změnách pravidel a rozesílejte je poštou nebo sdíleným souborem, aby každý hráč věděl, které varianty byly použity; důsledné používání těchto konvencí snižuje spory a udržuje hru taktickou, nikoli sémantickou.

Jak vyřešit výhodu/nevýhodu s více modifikátory

Berte se výhody a nevýhody binárně: pokud platí alespoň jeden zdroj výhody a alespoň jeden zdroj nevýhody, vzájemně se ruší a házíš normální kostkou d20; pokud platí pouze zdroje výhody, hoď dvěma kostkami d20 a vezmi si vyšší; pokud platí pouze zdroje nevýhody, hoď dvěma kostkami d20 a vezmi si nižší. Nejprve vyřeš tento hod, a poté přidej bonusy a postihy (vlastnosti, zběhlost, magické předměty, kryt nebo štít) pro určení zásahu a výpočet poškození.

Postup, který se dodržuje při každém útoku: 1) Vypište všechny zdroje, které by mohly ovlivnit kostku d20 (podmínky, pomoc, skrývání, obklíčení, speciální vlastnosti). 2) Rozhodněte, zda existuje výhoda i nevýhoda; pokud ano, berte to, jako by neexistovala ani jedna. 3) Hoďte odpovídajícím způsobem (normálně / 2× vezměte vyšší / 2× vezměte nižší). 4) Přidejte všechny modifikátory k vybranému výsledku kostky d20 (ploché bonusy z talentů, vlastností zbraně, krytu, štítu, situační modifikátory). 5) Porovnejte se základní AC cíle a vyhodnoťte zásah a udělte poškození. Tento postup zabraňuje počítání krytu jako výhody – kryt poskytuje AC, nikoli výhodu, i když se zdá podobný skrytí.

Common clarifications: multiple advantage sources do not stack into a greater mechanical effect unless a feature expressly says so (for example, a feature that allows rerolling additional d20s). Multiple disadvantages likewise do not worsen beyond a single disadvantage. A concealment source such as a single leaf or partial foliage might grant advantage if the attacker has concealed status, but a shield or a suit of armor crafted or equipped in the defender’s loadout changes AC instead of creating disadvantage for the attacker. A sidegrade weapon like a whip can change reach and the sort of tactical advantages available, but it does not multiply advantage on its own.

Edge cases and specific features: features that explicitly change the roll (extra d20 rerolls, advantage-to-crit conversions) are applied only if the roll produced by the advantage/disadvantage step qualifies; if advantage and disadvantage cancel, those features do not trigger. If a monk or other class feature later grants a special attack that contains its own roll rule, treat that rule as the primary instruction. Perception of the table: an effect that appears to give advantage might really just give a flat bonus; always check language for “advantage” or “disadvantage” rather than inferring from theme or movie-like tropes.

Practical examples: attacker +6 total vs target with base AC 15 and shield +2 (effective 17). If attacker has advantage from hiding and no disadvantage, roll 2d20 → dice 4 and 13 → take 13, add +6 = 19, hit and deal damages per weapon. If attacker also has a source of disadvantage (long range, poor footing), advantage and disadvantage cancel and you roll once. If a character receives multiple independent advantage sources, count them as a variety of narrative benefits but NOT as additional d20 rolls unless a rule explicitly crafts extra rolls.

When cover, concealment and cover types change AC and attack rolls

Apply cover bonuses to a target’s AC before resolving the attack roll: half cover = +2 AC, three-quarters cover = +5 AC, total cover prevents being targeted by an attack or a spell that requires a target.

Attack rolls against an unseen target are made at disadvantage; if the attacker is unseen by the target the attack roll is made with advantage. Lightly obscured terrain does not impose automatic attack disadvantage, it imposes penalties on sight-based Perception checks, while heavy obscure can render a target effectively unseen entirely.

Minor obstacles such as crates or a chest at waist height count as half cover; a narrow arrow slit or substantial battlement provides three-quarters cover. Solid walls and thick pillars are total cover unless the attacker has a clear line through an opening. A greek column or an ebony shield used as a barricade functions like any other half-cover object for targeting purposes.

Senses and special abilities change how cover and concealment interact: blindsight, tremorsense and truesight ignore concealment and light/heavy obscure; certain monster traits let dragons or spiders and other creatures bypass or create cover. Use tokens or a note labeled jsoc to mark temporary total-cover effects so the table can resolve them accurately.

Armor, armoring and padding affect AC but do not alter cover mechanics; piercing or missile attacks do not negate cover by default. Monks can spend ki to Step of the Wind and rapidly close distance to negate ranged cover, while other classes may need rounds or spent resources to flank and remove three-quarters protection.

When tracking actions, run a simple check each round: update who can see whom, whether terrain was moved or barricades destroyed, and how many minutes or rounds have passed since cover changed. Treat moving allies joining a line of fire as an immediate cover change thats resolved before any attack that begins afterward.

Tactical advice: prefer height and partial sightlines to force opponents into difficult choices; solid breastworks are tough to punch through, so prioritize objective removal (destroy barricade, topple pillar) over repeated long-range missile fire when cover grants +5 AC.

Managing short rests, hit dice spending and long rest timing

Spend hit dice aggressively when you drop below half of your max HP and the party has no remaining cure resources: aim to spend 1–3 hit dice on a typical short rest to recover a meaningful chunk of HP without exhausting pool for the next encounter. Formula: average HP recovered per hit die ≈ (die maximum + 1)/2 + Constitution modifier (example: a d8 with +2 Con ≈ 4.5 + 2 = 6.5 HP). You have a number of hit dice equal to your character level; when you finish a long rest you regain spent hit dice up to half your total (minimum 1). Use those rules to plan consumption within an adventuring day.

Time long rests around resource depletion, not arbitrary breaks: if the party has used more than 40–50% of spell slots and half the party’s hit dice, take a long rest; if only a single short fight occurred, delay the long rest to press advantage. Over a typical week of play expect 1–3 long rests depending on encounter density – more if travel or role-play days dominate. If you become the main frontline and wear heavy gear like studded leather or cuirasses, factor armor fatigue into decisions: a solid portion of the group’s offensive capability is tied to the tank’s hit dice pool.

Reserve hit dice for the hardest predicted encounters but avoid hoarding to the point that a surprise strike ends the session. If an explosive combat (ambush, traps with area damage, or a high-CR foe) is likely, spend extra hit dice in earlier short rests to reduce knockout chance; if threats are low and healing potions are plentiful, spend fewer dice and conserve for later. Certain classes with limited recovery options should prioritize regaining hit dice on long rests by coordinating party pacing and healing order.

Make choices before combat: give a quick call for who will consume potions first, who will spend how many hit dice, then act. Think in general terms about role flexibility – a skirmisher can launch hit-dice spending early to stay mobile, a support should delay to keep reactionary options. Play styles vary across groups and cultures; some parties move like a disciplined army in camos from a movie, others move cautiously. Match your hit-dice strategy to how your table expects to strike and recover.

How multiclassing alters proficiencies, spell slots and level milestones

Take a one-level dip in a martial class to secure base armor and weapon proficiencies immediately; this is the simplest way to begin with the equipment you need and suits anyone who wants flexible frontline options.

Proficiencies: you keep all proficiencies already gained, and when you add a new class you gain only the proficiencies explicitly included in that class’s multiclass entry. That means a single level can grant shields, a set of weapon proficiencies, or tool proficiencies (smithing, thieves’ tools), but not extra saving-throw proficiencies. Plan which proficiencies are hardest to acquire later and grab them early: if a campaign week will involve heavy incoming physical threats, prioritize heavy-armor proficiency; if you expect stealth squads and spider-like ambushes, grab light armor and stealth skills first.

Proficiency bonus and skills scale with total character level (your base total), so your attack and skill bonus growth is higher than an individual class level might suggest. However, class features that grant new skills, tool sets or equipment are class-level-dependent; a one-level dip will only include the items and proficiencies listed in that class’s multiclass sidebar.

Spell slots: combine caster levels to determine spell slot progression. Full casters add full levels. Half-casters (paladin, ranger) add one-half of their levels (round down). Third-casters (eldritch knight, arcane trickster) add one-third. Warlock’s pact-magic remains a separate pool that regenerates on short rests; you also keep pact slots and may use them to cast spells known from other classes. Example math: to reach third-level slots you need combined caster level 5 – that can be a single class at level 5, or a combination such as wizard level 4 + paladin level 2 (4 + 1 = 5). Track spells known/prepared per class: your spell list and prepared spells remain class-specific even though slots are shared through the combined table.

Spellcasting caveats: the number of spells you know or can prepare is determined by each class’s level, not your combined caster level. Metamagic, pact features and other class-limited spell improvements unlock only at their specified class milestones, so dipping can delay those thresholds even while granting higher shared slots.

Level milestones and feature timing: class features (extra attack, subclass improvements, superior martial maneuvers) unlock based on that class’s level. If you want an extra attack at level 5, you must reach level 5 in the martial class that grants it – multiclassing delays that milestone. Fighter-style features like multiple attacks or action surges come from dedicated progression; if those are part of your playstyle, take those levels early rather than chasing insanely attractive spell combinations that push the milestone out.

Practical recommendations: (1) Identify the single-class milestones you can’t delay (extra attack, third-level subclass ability, a unique archetype capstone). (2) Use a one-level dip to collect immediate proficiencies and equipment if that matches incoming threats or loot expectations. (3) For earlier higher slots, favor adding levels in full casters or mix full + half to reach combined thresholds faster. (4) Keep an eye on pact-magic interactions – warlock slots are a flexible bonus but don’t replace class-based spell progression.

Examples in play: a wizard 4 / paladin 2 combination nets combined caster level 5 for third-level slots while keeping paladin weapon proficiencies; a rogue 1 dip gives tool smithing and light armor while preserving the rogue’s skill suite. Think of multiclassing like splitting squads: your combination must match incoming enemy threats, loot goals (chest with a cobalt blade or a grenade-like device), and role needs – don’t trade a class milestone that defines your play for a small gain in mana or a single powerful spell unless that match is intentional.

Checklist before multiclassing: list the class features you want by class level, mark which proficiencies are included on the multiclass table, compute combined caster level and spell-slot gains, and verify whether any subclass or skill (smithing, chest traps, spider-themed abilities) hinges on reaching the third or higher tier in a single class. If unclear about one choice, simulate two weeks of play at each projected breakpoint – this reveals which milestones feel the hardest to lose or the most flexible to trade.

Final note: multiclassing is a combination decision – treat it like loot allocation across squads: choose what to keep, what to trade, and what to delay so that your build matches both play expectations and the incoming threats rather than fragmenting core strengths (hpsec, skills, and role coherence).

Practical player builds and role decisions

Recommendation: pick a flexible frontline operator with stalhrim helmets in the upper armor slot, a hand shield in the off-hand, and padding for hit-point buffer to reach a baseline of 17–19 AC and soak 30–40% of incoming damage in a standard encounter.

Assign roles by quantifiable thresholds: tanks should have at least 16 Con, +3 to defenses from gear, and be able to hold initiative for two rounds; controllers must deliver area denial covering a 20-foot radius; strikers need single-target output of 30–40 damage per round for hard-earned kills. For instance, monks excel at mobility and precision damage but require low armor penalties; monks with a focus on dexterity and mobility hit sprint benchmarks of 35–40 ft.

When selecting gear, prioritize slots with multiplicative impact: upper armor and hand slots alter incoming and outgoing thresholds most. A brilliant outcome comes from shifting one slot: swap a damage gem for a defensive rune to reduce wipes by 40% in tight encounters. If resources were scarce, spend hard-earned currency on stalhrim helmets first – they scale across levels and increase replayability of a single set.

Role decisions: assign operators by function, not flavor. Anyone who can meet the stat thresholds above should fill the role; do not force archetypes. For example, a flexible striker-operator with light armor and high mobility can cover for monks during embassy infiltration instances, then swap to tanking with temporary padding gear for strong defenses during sieges.

Tactics: use initiative manipulation as a force multiplier – gaining upper turn order for two rounds yields control windows that compensate for lower raw numbers. Defenses stack: cover + helmet + padding = layered reduction; aim for at least three independent sources. Lightning burst effects should be reserved for clustered enemies to maximize efficiency; single-target fights are for sustained DPS sets.

Practical progression: lock one core set per role and a secondary hybrid set for emergency swaps. This increases replayability and reduces grind. Operators with overlapping competencies were the most valuable in campaign play: one reliable anchor, one flexible striker, and one support who can also control will cover 90% of mission types. Definitely prioritize adaptability over niche min-maxing unless the campaign explicitly rewards single-build specialization.